Your browser does not support JavaScript!
Menu
林君明

 

(一) 基本資料

 

姓名

 

 

林君明

 

職稱

 

 

教授

 

 

 

 

 

 

連絡電話

 

 

03-5186438

 

傳真

 

 

 03-5186521

 

研究室

 

 

M121

 

 

E-Mail

 

 

jmlin@chu.edu.tw

 

聯絡地址

 

 

30012新竹市五福路2段707

 

學歷

 

國立交通大學 電子工程系 學士 (1970年09月~1974年06月)

國立交通大學 電子研究所 碩士 (1974年09月~1976年06月)

國立交通大學 電子研究所 博士 (1980年09月~1985年06月)

 

 

經歷

 

 

 

中科院 第二研究所 助研員 (1980年09月~1985年04月)

中科院 第二研究所 副研員 (1985年04月~1992年07月)

中科院 第二研究所 技監 (1986年07月~1992年07月)

中華工學院 機械系及航太所 副教授 (1996年02月~1996年02月)

中華工學院 機械系及航太所 系主任、所長 (1996年08月~1997年07月)

中華大學 工學院 專門委員 (2004年08月~2006年07月)

中華大學 研發處 研發長 (2006年08月~2009年01月)

中華大學 機械系及航太所 教授 (1996年02月~2009年08月)

中華大學 通訊工程學系 教授 (2009年08月)

 

專長

 

 

導航與通訊、無線辨識(RFID)感測器、微光機電系統、微航電系統

 

 

實驗室

 

 

M122

 

 

(二) 研究成果

期刊論文

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

J. M. Lin and K. W. Han, “Model Reduction for Control Systems with Parameters Variations”, Journal of Franklin Institute, Vol.317, No.2, pp.117 -133, Feb. 1984.(SCI)

2

J. M. Lin and K. W. Han, “Reducing the Effects of Model Reduction due to Parameters Variations”, AIAA Journal of Guidance, Control, and Dynamics, Vol.8, No.6, pp.785 -787, Nov. –Dec.1985. (SCI)

3

J. M. Lin, “Modified Measurement Differentiation Method for Stochastic Control System”, AIAA Journal of Guidance, Control, and Dynamics, Vol.17, No.5, pp.1042 -1049, September-October, 1994. (SCI)

4

J. M. Lin, “System Designed by Linear Exponential Quadratic Gaussian and Loop Transfer Recovery Methodology”, AIAA Journal of Guidance, Control, and Dynamics, Vol.18, No.1, pp.189-192, January-February, 1995. (SCI)

5

J. M. Lin and Y. F. Chau, “Radome Slope Compensation Using Multi-Model Kalman Filters”, AIAA Journal of Guidance, Control, and Dynamics, Vol.18, No.3, pp.637 -640, May-June, 1995. (SCI)

6

J. M. Lin and S. W. Lee, “Bank-to-Turn Optimal Guidance with Linear Exponential Quadratic   Gaussian Performance Criterion”,

Journalof Guidance,Control,and Dynamics,Vol.18, No.5,   pp. 951-958, September–October, 1995 (SCI)

7

J. M. Lin and Y. S. Hwang, “Optimal Guidance Law Design for Very Low Attitude Air Defense,” Transactions of the Aeronautic and Astronautic Society of the Republic of China, Vol.26, No.1, pp.9-22, 1994. (EI)

8

J. M. Lin, H. C. Lin, and P. K. Chang, “A Study of INS Aided by GPS”,

Transactions of the Aeronautic and Astronautic Society of the Republic of China, Vol.26, No.3, pp.213-221, 1995. (EI)

9

J. M. Lin, C. H. Chang and H. L. Tsai, “Game Theoretical Control System Design by LEQG/LTR Method,”

Transactions. of the Aeronautic and Astronautic Society of the Republic of China, Vol.28, No.1, pp.47-58, 1996. (EI)

10

J. M. Lin and T. S. Chio, “Guidance System Design by LEQG/DC Method,” J. Control, Systems and Technology, Vol.4, No.1, pp.1-11, 1996. (EI)

11

J. M. Lin and H. C. Lin, “GPS Navigation Data Signal Processing,” Transactions of the Aeronautic and Astronautic Society of the Republic of China,Vol.28, No.2, pp.153-161, 1996. (EI)

12

H. L. Tsai, C. H. Chang, and J. M. Lin, ”CGT Design by Linear Exponential Quadratic Gaussian/Loop Transfer Recovery Method, ”J. of Chung Cheng Institute of Technology, Vol.25, No.1, pp.27-46, July 1996.

13

C. H. Chang, J. M. Lin, and H. L. Tsai, “Eigen-structure Assignment of Control System Design Based on LEQG/LTR Method,” J. of Chung Cheng Institute of Technology,Vol.25, No.1, pp.99-114, July 1996.

14

J. M. Lin, C. H. Huang and H. L. Tsai, “Optimal Trajectory Tracking System Design by LEQG/LTR Method,”J. Chinese Institute of Electrical Engineering, Vol.4, No.1, pp.15-26,1997. (EI)

15

J. M. Lin and H. C. Lin, “Performance Analysis On some Solutions of GPS Navigation Equation and Data Smoothing Method,” J. Control, Systems and Technology, Vol.5, No.2, pp.135-144, 1998. (EI)

16

林君明, “全球定位系統與慣性導航系統整合之導航系統,” 國科會工程科技通訊,電機. 第27期,32-36頁,民國86年12月.

17

J. M. Lin, C. H. Chang and H.L. Tsai, “Optimal Command-Generator Tracker Design by Linear Exponential Quadratic Gaussian and Loop transfer Recovery Method,”International J. of Systems Science, 1999. (EI)

18

J. M. Lin and C. S. Chen, "Multi-Sampling Period Study of INS Aided with GPS," Transactions of the Aeronautical and Aeronautical Society of the Republic of China,Vol.31, No.1, pp.57-68, 1999.

(EI)

19

J. M. Lin and M. C. Lin, “LEQG/LTR Controller Design with Extended Kalman Filter for Sensorless Induction Motor Servo Drive,” IEICE Transactions on Fundamentals of Electronics, Communications, and Computer SciencesVol.E82-A, No.12, pp.2793-2801, December 1999. (SCI)

20

林君明,王修平,林明昌,劉堰燦, “線性指數二次式高斯法/回路轉移回歸法應用於直流無刷馬達速度控制器設計,” 電力電子技術, No.51, pp.30.1999年6月.

21

Jium-Ming Lin, Hsiu-Ping Wang, Ming-Chang Lin, “Balanced Controller /Singular Perturbation Approximation for Controller Order Reduction, ”J. Chung Cheng Institute of Technology, Vol. 29, No.1, pp.99-114, July 2000.

22

Jium-Ming Lin, Hsiu-Ping Wang, Ming-Chang Lin, “LEQG/LTR Controller Design for Induction Motor Servo Drive System,” J. Chung Cheng Institute of Technology, Vol. 29, No.2, pp.125-130, December 2000.

23

J. M. Lin, M.C. Lin and Hsin-Ping Wang, “LEQG/LTR Controller Design with Extended Kalman Filter for Sensorless Brushless DC Driver, ”Journal of Computer Methods Appl. Mechanical Engineering,Vol. 190, pp.5481-5494, 2001. (SCI)

24

Jium-Ming Lin, Cheng-Wen Hwang, and Fong-Long Tsai, “Vehicle Navigation System Integration with GPS/INS/GSM, ” Chung-Hua Journal of Science and Engineering,Vol. 1, No. 1, pp. 103-112, March 2003.

25

林君明、黃榮祥、蘇茂舜、李宗翰, “單晶片微機電加速儀熱殘留應力及犧牲層濕式蝕刻之形變應力分析, ” 中華理工學刊,第一卷, 第二期, 第7-17頁, 民國92年9月

26

Jium-Ming Lin, “Surface Profiler Design with Kalman Filtering and Multi-Sensor Data Fusion Methods,” Chung-Hua Journal of Science and Engineering, Vol. 1, No. 2, pp. 19-27, September 2003.

27

林君明, “微航電慣性感測系統與全球定位系統整合設計,” 國科會工程科技通訊, 第75    期,第207~210頁, 2004年8月.

28

林君明、陳俊良、陳科謀,“微機電壓力計量測電路之設計,”中華理工學刊第二卷,第一期,第71~78頁, 民國93年3月.

29

Huan-Liang Tsai, Jium-Ming Lin, and Chun-Shiang Chiu, “Optimal Satellite Attitude Control System Design by Combination of Eigen-structure Assignment and LEQG/LTR Methods,”中國航空太空學會學刊,第36卷,第1期,第77-86頁,民國93年3月。(EI)

30

林君明、黃永平、莊凱驛,“全球定位機收機都蔔勒頻移之載具定位法研究,”中國航空太空學會學刊, 第36卷,第2期,第179-184頁,民國93年6月。(EI)

31

林君明,莊凱驛,張博光,康文傑,“ARINC 429航電儀錶通訊介面功能測試與評估系統

 平臺設計” , 中華理工學刊, 第二卷,第三期, 第19~26頁, 民國93年12月.

32

林君明,林嶽峰,“IEEE 1451 智慧型感測器模組設計”,中華理工學刊,第三卷,第二期,115~121頁,民國94年3月.

33

林君明,宋偉正,邱聰輝,莊凱驛,張博光,康文傑,“整合載波相位三差及泰勒多項式近似法之定位系統研究,”中國航空太空學會學刊,第37卷,第2期,民國94年6月第193~202頁,2005(EI)

34

林君明、陳嘉賢,“以DSP為平臺之GPS/DR/GIS與聲控整合式平面導航系統設計,”中華理工學刊, 第三卷,第五期,第35~42頁,民國94年9月.

35

Jium-Ming Lin and Jung-Chie Lin, “Surface Profiler Design with Multi-Sensor Data Fusion Methods,”Journal of Chinese Society of Mechanical EngineersVol. 26, No. 6, pp. 747-752, 2005(EI).

36

Jium-Ming Lin and Chia-Shin Wu, “MEMS 8-Bits DAC Design,Journal of Chinese Society of Mechanical EngineersVol. 26, No. 6, pp. 765-771, 2005(EI).

37

Jium-Ming Lin, and Chun-Chieh Lin, “Non-Contact Mode SPM System Design with MEMS Microprobe,” Chung-Hua Journal of Science and Engineering, Vol. 4, No. 2, pp. 117-123, 2006.

38

Puo-Kuang Chang, Jium-Ming Lin, and Yuan Lo, “Smart Vehicle INS and Voice Guided System Study,” Journal of Aeronautics, Astronautics and Aviation, Series A,Vol. 39, No.1, pp.049-056, 2007. (EI)

39

Jium-Ming Lin and Wen-Jim Tsai, “Wafer Level MEMS Vertical Probe Card Design,”Tamkang Journal of Science and EngineeringVol. 10, No. 2, pp.113-120, 2007(EI).

40

Jium-Ming Lin, Po-Wei Lin, and Li-Chern Pan, “A Study of Fabricating Micro array Bioprobe Device on a Flexible Substrate,”Journal of Biomechanics,Vol. 40, Supplement 2, p. S664, 2007(SCI).

41

Jium-Ming Lin, An-Jim Hwang, and Chun-Chieh Lin, “Contact Type Surface Profiler Design with Multi-Sensor Data Fusion Methods,” Chung-Hua Journal of Science and Engineering, Vol.5, No. 2, pp. 57-62, 2007.

42

Po-Kuang Chang and Jium-Ming Lin, “Intelligent Mobile Satellite Antenna Tracking System Design,” Chung-Hua Journal of Science and Engineering, Vol.6, No. 2, pp. 57-62, 2008.

43

Jium-Ming Lin, 智慧型聲控汽車導航與通訊系統整合研究,”工程科技通訊 (Engineering   Science and Technology Bulletin, NSC ISSN 1995-9303 ), 2008年9月刊(第98期), 2008, p.229 - 231.

44

Jium-Ming Lin and Po-Kuang Chang, “Eliminating Hysteresis Effect of Force Actuator for Profiler Design with Rate Inner Loop Compensation,” Material Science Forum (Book: Advanced Manufacture 2007), Vol. 594, pp.363-367, November 2008(EI).

45

Jium-Ming Lin and Po-Kuang Chang, “Opto-Mechatronics Integration for Nanometer Measurement,” Material Science Forum (Book: Advanced Manufacture 2007),Vol. 594, pp.437-442, November 2008(EI).

46

Jium-Ming Lin and Po-Kuang Chang, “Scanning Probe Microscope System Design with Linear Velocity Transducer for Feedback Compensation,”Chung-Hua Journal of Science and Engineering, Vol.7, No. 2, pp. 61-66, 2009.

47

Jium-Ming Lin and Po-Kuang Chang, “Applying Intelligent Fuzzy Control to Reduce Hysteresis Effect of Force Actuator in a SPM,” WSEAS Transactions on Systems and Control, Issue 7, Vol.4, July, pp. 271-285, 2009(EI).

48

Jium-Ming Lin and Po-Kuang Chang, “Integrating MEMS Electro-Static Driven Micro-Probe and Laser Doppler Vibrometer for Non-Contact Vibration Mode SPM System Design,” Accept for publication at Tamkang Journal of Science and Engineering, 2009(EI).

49

Jium-Ming Lin and Zhong-Qing Hou, “Bio-Sensing and Monitor System Design with Micro Array Probes and Amplifier on an Active RFID Tag,”Acceptedfor publication at BME Journal (Journal of Biomedical Engineering: Applications, Basis and Communications), 2009(SCI).

會議論文

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

J. M. Lin, “Bank-to-Turn Optimal Guidance with Linear-Exponential Gaussian Performance Index and Constant Acceleration Bias”, American Control Conference,Boston, June, 26-28, 1991.

2

J. M. Lin, “Satellite Attitude Control by LEQG/LTR Methodology,”Pacific International Conference on Aerospace Science and Technology (PICAST ‘93),National Cheng Kung University, Taiwan, December 1993, pp.135-144.

3

李仕文,林君明, “線性指數性能指標及固定加速度偏量之傾斜轉彎最佳終端導引律”, Proceedings of 14th National Symposium on Automatic Control, Hsin-chu, pp.165-171, December 14-15,1990.

4

許明祿, 林君明, “俯仰偏航自動駕駛儀的補償器增益之設計”,Proceedings of 14th National Symposium on Automatic Control, Hsin-chu, , pp.186-191, December 14-15, 1990.

5

朱國禎, 林君明, “超低空最佳終端導引律設計”, 導引控制研討會, 中山科學研究院,pp.31-35, 民國80年3月12日.

6

易渙民, 林君明, “傾斜轉彎飛彈滾轉自動駕駛儀前向饋入之參數空間與相對穩定度設計法”, 導引控制研討會中山科學研究院 pp.167-172, 民國80年3月12日.

7

趙遠鳳, 林君明, “適應性多重卡門濾波器法鼻錐罩斜率誤差補償器設計”, Proceedings of the 1991 Aeronautics and Aeronautics Conference, Taipei, Taiwan, , pp. 643-652, December 1, 1991.

8

林君明, 趙遠鳳, “多重卡門濾波器法鼻錐罩斜率誤差估測研究”, Proceedings of 15th National Symposium on Automatic Control, Chung-Li, pp.602-609, December 19-20, 1991.

9

J. M. Lin, “Robust Control System Design by Linear Exponential Quadratic Gaussian and Loop Transfer Recovery Method”, Proceedings of 17th National Symposium on Automatic Control, Tai-Nan, pp.278-284, March 1993.

10

林君明, 黃意勳, “飛彈攔截超低空目標之最佳終端導引律設計”, Proceedings of the 1993 Aeronautics and Astronautics Conference, Chung-Yuan Christian University, Chung-Li, Taiwan, pp.631-640, November, 1993.

11

林君明, 蔡渙良, “滾轉頻道自動駕駛諧調式穩定器之設計,”Proceedings of the 1993 Aeronautics and Astronautics Conference, Chung-Yuan Christian University, Chung-Li, Taiwan, pp.617- 624, November, 1993.

12

林君明, 洪績旺, “以共變異數描述函數模擬法研究非線性鼻錐罩斜率誤差對導引命中精度之影響”, Proceedings of the 1993 Aeronautics and Astronautics Conference,Chung-Yuan Christian University, Chung-Li, Taiwan, pp.675-683, November, 1993.

13

林君明, 邱天嵩, “最佳導引及估測雙重控制法則之設計, 第二屆國防科技學術研討會論文集,桃園大溪,中正理工學院, 民國83年8月, pp.25 - 33, 1994.

14

林君明, 王惠陽,“多變數系統模型簡化法”, Proceedings of 18th National Symposium on Automatic Control, Lung-Tan, pp.391-393, March 1994.

15

林君明, 張博光,“全球定位系統及慣性參考導航系統複合之研究”, Proceedings of the 1993 Aeronautics and Astronautics Conference, Hsin-chu, Taiwan, pp.615 -622, December 1994.

16

林君明, 張哲旭, 蔡渙良,“ESA/LTR Control System Design Based on LEQG Method”, Proceeding of 19th National Symposium on Automatic Control, Tai-Chung, pp.517-524, March 1995.

17

T. S. Chio and J. M. Lin, “Guidance System Design by Linear Exponential Quadratic Gaussian and Dual Control Method”, 19th Congress of the International Council of the Aeronautical Science (ICAS), Anaheim, Ca. U.S.A, pp.2302-2311, 18-23 September, 1994.

18

林君明, 張博光,“全球定位系統及慣性參考導航系統複合之研究”, Proceedings of the 1994 Aeronautics and Astronautics Conference, Hsin-chu, Taiwan, pp.615-622, December 1994.

19

林君明, 林鴻志,“全球定位系統及信號處理法則研究,”Proceedings of the 1995 Aeronautics and Astronautics, Taipei, Taiwan, pp.673-680, December 1995.

20

林君明, “GPS作姿態量測可行性研究,”第一屆海峽兩岸航空太空學術研討會, 淡江大學, pp.309-318, December 14-15, 1995.

21

王光伯, 林君明,“全球定位系統及慣性導航系統複合之計算器架構研究,”Proceedings of the 1995 Aeronautics and Astronautics, Taipei, Taiwan, pp.681-688, December 1995.

22

Jium-Ming Lin and Hong-Chi Lin, “ A Study of GPS Data Signal Processing,” Proceeding of 20th National Symposium on Automatic Control, Taipei, Taiwan, April 12-13, 1996, pp.231-241.

23

林君明, 黃振文, “全球定位系統與慣性導航系統整合之導航系統研究”, Proceedings of the 1996 Aeronautics and Astronautics, Taipei, Taiwan, pp.417-424, December 1996.

24

Huang-Liang Tsai and Jium-Ming Lin, “Auto-Pilot Command-Generator Tracker Design by LEQG/LTR Method,” 20th Congress of the International Council of the Aeronautical Sciences (ICAS), Sorrento, Napoli, Italy, September 1996, pp.1921-1929.

25

林君明,陳見生, “全球定位系統輔助之慣性導航系統數位化多重取樣週期之研究”,

Proceedings of the 1997 Aeronautics and Astronautics, Taipei, Taiwan,1997.

26

Jium-Ming Lin and Cheng-Wen Huang, “Vehicle Navigation System Design by Integrating INS with GPS,”Proceedings of 22nd National Symposium on Automatic Control, Yun-Lin, pp.453-458, 1998.

27

林君明,“懸樑式探針顯微系統設計,” 第五屆微系統科技協會年會及微機電研討pp127-131,1999.

28

林君明,“微重力接觸掃瞄式探針系統控制設計模擬析,”第三屆奈米工程及微系統技術研討會, pp.4-59~4-63, 1999.

29

林君明,王修平,林明昌,劉堰燦,“線性指數二次式高斯法/回路轉移回歸法應用於直流無刷馬達速度控制器設計,” 中華民國第二屆電力與馬達驅動技術研討會, pp.B-3-1~B-3-6, 1999.

30

Jium-Ming Lin, “Stylus Probe Microscophy with Kalman Filtering and Multi-Sensor Data Fusion Methods,”第十七屆機械工程研討會論文集, 高雄國立第一科技大學, December 8-9, 2000, pp.501-506.

31

Jium-Ming Lin, “Stylus Probe System with Multi-Sensor Data Fusion,” 5th International Conference on Manufacturing Technology, Beijing ChinaOctober 31-Novermber 3, 1999.

32

Jium-Ming Lin,  Ji-Der Lo and  Rong-shyang Hwang, “Dual Bridged-Accelerometer Design by UMC 0.5um CMOS Fabrication Process with Metal Sacrificial Layer, ”第24屆全國力學會議中原大學, ATM 24/E-48, December 9-10, 2000.

33

Jium-Ming Lin, H.P. Wang and M.C. Lin, “ LEQG/LTR Controller Design with Extended Kalman Filter for Sensorless Induction Motor Servo Drive System,” 22ndInternational Congress of Aeronautical Sciences, Harrogate, United Kingdom, 27 August~1 September 2000, Paper NO.ICAS-2000-6.3.4.

34

林君明, “全球定位系統都蔔勒頻移差分定位法研究,” 2001 CIROC CSCA AASRC  Joint  Conference , Taoyan, pp.AA-297, March 17, 2001.

35

Jium-Ming Lin, and Feng-Lung Tasi, “Position and Navigation System Design Doppler Frequency Shift Technology,” PICAST 4, Paper NO. S.2.4, 21-23 May 2001.

36

林君明、蘇茂舜、黃榮祥, “單晶片汽車導航XY軸加速儀及Z軸陀螺儀設計與模擬,” 2002中華民國自動控制研討會, Hsin-Chu, Taiwan, R. O. C., pp.1062~1067, 2002.

37

林君明、蘇茂舜、黃榮祥, “ 微機電濕式蝕刻釋放後制程對微結構之形變應力分析”,國科會中區微機電中心共用晶片研討會暨2002年奈米暨微系統研討會,新竹,臺灣,中華民國, pp. 51- 56, 2002.

38

Jium-Ming Lin, Maou-Shung Su, Zong-Han Lee, and Rong-Shyang Hwang, “Avionic Navigation MEMS Accelerometer Thermo-Mechanical Analysis and Design,”Proceedings of 2002 Advanced Manufacturing Technologies and Education, National Chung Cheng University, Chia-Yi, Taiwan, August 11-14, 2002.

39

Jium-Ming Lin, “Stylus-Probe Microscopy with Kalman Filtering and Multi-Sensor Data Fusion,” 2002 International Conference on Engineering Education, UMIST U. K., August 2002.

40

Huang-Liang Tsai, Jium-Ming Lin, and Chung-Shiang Chio, “Singular Optional Control System Design with Linear Exponential Quadratic Criteria,” 2003 National Control System Proceedings (2003自動控制研討會暨生物機電系統控制與應用研討會), Ching-Yuan Institute of Technology, March 13-14, Chung-Li, 2003.

41

林君明、鄭竣元,“GPS/DR導航系統整合設計,”22屆量測學術及應用研討會,桃園國防大學中正理工學院測繪工程系, pp. 341-347, 民國92年9月.

42

林君明、莊凱驛, “三次差分全球定位系統設計,” 2003航空電子科技與應用研討會,高雄空軍官校, pp .A2-1-A2-7 民國92年10月.

43

Jium-Ming Lin, “Integration of Control and DSP for Vehicle Navigation System with GPS/INS/GSM and Modem Linking,” 2003 International Conference on Engineering Education, Valencia Spain, July 2003.

44

林君明, “微機電壓力計量測電路之教學與研究”,第三屆精密機械製造研討會,臺灣高雄,中山大學,民國92年11月15日, 第815-822頁.

45

林君明、鄭竣元, “微航電慣性感測系統與全球定位系統整合設計, ” 2003年中國航太學會/中華民用航空學會學術研討會,臺灣台南成功大學, 民國92年12月19日.

46

Huang-Liang Tsai, Chen-Hung Lin, Tsang Chiang, and Jium-Ming Lin, “Structure Uncertainty of Non-Minimum Phase Systems in LQG/LTR Procedure,” 2004 National Control System Proceedings, Da-Yeh University, Chang-Hua,March 27, 2004, pp. 991-1008.

47

Huang-Liang Tsai, Chen-Hung Lin, Tsang Chiang, and Jium-Ming Lin, “Structure Uncertainty of Non-Minimum Phase Systems in LQG/LTR Procedure,”2004 National Control System Proceedings, Da-Yeh University, Chang-Hua,March 27, 2004, pp. 991-1008.

48

Jium-Ming Lin, “MERGEFIELD TitleMEMS Accelerometer Thermo-Mechanical Analysis and Design,” The 11th Symposium on Nano Device Technology (SNDT 2004),Microelectronics and Information Systems Research Center, National Chiao Tung University, Hsinchu, Taiwan, May 11-13, 2004, pp.493-499.

49

Jium-Ming Lin, “Teaching and Design on Smart MEMS Pressure Sensor Module,” 2004 International Conference on Engineering Education and Research (iCEER), Bouzov Castle, Czech Republic, June 27-30, 2004, pp. 273-281.

50

Huang-Liang Tsai and Jium-Ming Lin, “Unification of Eigen-Structure Assignment and Linear Exponential Quadratic Gaussian/Loop Transfer Recovery Methods,”第五屆海內外華人航太科技研討會,中國,西安,九月七至十日,第604-6112004.

51

Jium-Ming Lin, “Teaching and Design on Integrating Interpolation Electronics for Nanometer Measurement and Positioning,” 2004 International Conference on Engineering Education (iCEE2004), Gainesville, Florida, October 16-21, 2004.

52

林君明、陳俊良,“微機電壓力計測試器設計教學與研製,”第四屆精密機械製造研討會,臺灣臺北,國立臺北科技大學,民國93年11月13日,第815-822頁.

53

林君明、李高全, “可控制接觸力之掃描探針顯微系統教學與研製,”第四屆精密機械製造研討會,臺灣臺北,國立臺北科技大學,民國93年11月13日, 第815-822頁. 

54

林君明、林嶽峰, “無線智慧型壓力與溫度感測模組教學與研製,”第四屆精密機械製造研討會,臺灣臺北,國立臺北科技大學,民國93年11月13日, 第815-822頁.

55

林君明、鄭竣元, “簡易型GPS/DR/GIS整合之載具平面導航系統設計, ” 2004年中國航太學會/中華民用航空學會聯合學術研討會, 臺灣台中逢甲大學,民國93年12月12日.

56

林君明、莊凱驛, “ARINC 429航電儀錶通訊介面功能測試與評估系統平臺設計與研製,”2004年中國航太學會/中華民用航空學會聯合學術研討會,臺灣台中逢甲大學,民國93年12月12日.

57

林君明、莊凱驛, “以嵌入式DSP為平臺之GPS/INS導航整合系統設計,”2004年中國航太學會/中華民用航空學會聯合學術研討會, 臺灣台中逢甲大學, 民國93年12月12日.

58

林君明、黃永平、莊凱驛, “都蔔勒頻移法定位元系統研究,”2004年中國航太學會/中華民用航空學會聯合學術研討會, 臺灣台中逢甲大學, 民國93年12月12日.

59

Jium-Ming Lin, “Experiment Design on Smart MEMS Sensor Module,” 2005 International Conference on Engineering Education and Research (iCEER), National Cheng-Kung University, Tainan, Taiwan,March 1-5, 2005.

60

Jium-Ming Linand Chia-Shing Wu, “MEMS Pressure Sensor Tester Design,” The 12th Symposium on Nano Device Technology (SNDT 2005), May 4-5, 2005, Microelectronics and Information Systems Research Center, National Chiao Tung University, Hsinchu, Taiwan,行政院奈米實驗室,民國94年5月4-5日.

61

Jium-Ming Linand Chia-Shing Wu, “MEMS 8-bits Digital-to Analog Converter Design,” The 12th Symposium on Nano Device Technology (SNDT 2005), Microelectronics and Information Systems Research Center, National Chiao-Tung University, Hsinchu, Taiwan.,行政院奈米實驗室, May 4-5, 2005,民國94年5月4-5日.

62

Jium-Ming Lin and Yueh-Fong Lin, “Wireless Smart Pressure Sensor Module Design,” Proc. of Automation 2005, The Eighth International Conference on Automation Technology Conference, Taichung, Taiwan,May 5-6, 2005.

63

Jium-Ming Lin and Jun-Che Lin, “Wireless Smart Pressure Sensor Module Design,” Proc. of Automation 2005,The Eighth International Conference on Automation Technology Conference, Taichung, Taiwan, May 5-6, 2005.

64

Jium-Ming Lin, Huang-Liang Tsai, and Chen-Hung Lin, “General Optional Control System Design by Structured Uncertainty Description and Eigen-Structure Assignment Method,”Proceedings of the 5th World Congress on Intelligent Control and Automation, June 15-19, 2004, Hangzhou, P. R. China, pp. 396-400. (EI)

65

Huang-Liang Tsai, Jium-Ming Lin, Tsang Chiang, and Cheng-Yu Cheng, “Optional Satellite Attitude Control System Design by Combination of Eigen-Structure Assignment and LEQG/LTR Methods,” Proceedings of the 5th World Congress on Intelligent Control and Automation, June 15-19, 2004, Hangzhou, P. R. China, pp. 407-412. (EI)

66

Jium-Ming Lin, Chun-Yuan Chen, and Chia-Hsien Chen, “VehicleNavigation and Communication System Design for Maimed Persons by Integrating GPS/INS/GIS/GSM and Voice Modules,” 2005 IEEE ICM/HIMA(Hands-on Intelligent Mechatronics and Automation), The Grand Hotel, Taipei, Taiwan, July 10-12, 2005.

67

林君明、鄭竣元、張博光、康文傑, “簡易型GPS/DR/GIS整合之載具平面導航系統設計,”第三屆全球華人航空科技研討會,中國,西安,2005年,9月17-20日,第138-144頁.

68

林君明、莊凱驛, “ARINC 429航電儀錶通訊介面功能測試與評估系統平臺設計與研製,”第三屆全球華人航空科技研討會,中國,西安,2005年,9月17-20日,第156-164頁.

69

林君明、陳嘉賢, “以DSP為平臺之GPS/DR/GIS與聲控整合式平面導航系統設計,”第十屆車輛工程學術研討會,民國94年11月16-17日.

70

Jium-Ming Lin, Chun-Yuan Chen, and Chia-Hsien Chen, “Vehicle Navigation System for INS Integrated with GPS,”2005年第一屆兩岸機電暨產學合作學術研討會,民國94年11月23日.

71

Jium-Ming Lin and Chia-Hsing Wu,“Thermometer Code Current Mode 8-bits Digital- to-Analog Converter Design,”

2005年第一屆兩岸機電暨產學合作學術研討會,民國94年11月23日.

72

林君明、陳嘉賢, “以DSP為平臺之GPS/DR/GIS與聲控整合式平面導航系統設計,”國科會工程處控制學門93年度成果報告研討會,民國94年11月18-19日.

73

Jium-Ming Lin, Chun-Yuan Chen, and Chia-Hsien Chen, “Integrated Car Voice Control and Navigation System Design,” Proceedings of 2005 CACS Automatic Control Conference (International Session), Tainan, Taiwan,Nov. 18-19, 2005.

74

張博光、邱垂錡、呂仁超、陳建賓、林君明, “RF ID 電子標籤垂直探針卡, ”中華民國第十四屆國防科技學術研討會, 2005年,11月24至25日.

75

Jium-Ming Lin and Jun-Che Lin, “Surface Profiler Design with Multi-Sensor Data Fusion Methods,” Proceedings of 2005 International Conference on Advance Manufacture, Nov. 28-Dec. 02, 2005.

76

Jium-Ming Lin and Chia-Shin Wu, “MEMS 8-Bits DAC Design,” Proceedings of 2005 International Conference on Advance ManufactureNov. 28-Dec. 02, 2005.

77

林君明、陳嘉賢, “以DSP為平臺之GPS/DR/GIS與聲控整合式平面導航系統設計,”

2005年中國航太學會/中華民用航空學會聯合學術研討會,空軍官校岡山, 民國94年12月10日.

78

Jium-Ming Lin, Jei-Chin Peng, and Chun-Chieh Lin, “Microprobe and Non-Contact Mode SPM System Design,”The 13th Symposium on Nano Device Technology (SNDT 2006), p. 108, T6-01 (2006).

79

林君明, “垂直式彈性探針及附壓力感測器之晶圓及垂直式探針卡(專利發明第 I 231371號),”中華大學第2屆研究成果發表與推廣說明會成果彙編,中華大學研發處, 95年5月1日第99至119頁.

80

Jium-Ming Lin and Huang-Liang Tsai, “General Autopilot Design for BTT Missile by Generalized Linear Quadratic Gaussian / Loop Transfer Recovery Method,” AIAA Guidance, Navigation, and Control Conference,Keystone Colorado, August 21-24, AIAA Paper No. 2006-6571, pp.1-15, 2006. (EI)

81

Jium-Ming Lin and Chun-Chieh Lin, “Non-Contact Mode SPM System Design by Integrating MEMS Electro-static Micro-probe and Laser Doppler Interferometer,” 2006 IEEE International Conference on Systems, Man, and Cybernetics, Oct. 8-11, Taipei, Taiwan, pp. 4591-4596, 2006.(EI)

82

Jium-Ming Lin, Po-Kuang Chang, and Yuan Lo, “Integrated Smart Car Navigation and Voice Control System Design,”The 32nd Annual Conference of the IEEE Industrial Electronics Society, Conservatories National des Arts & Métiers, Paris, France, Nov.7-10, pp. 760-765, 2006.(EI)

83

Jium-Ming Lin, Po-Kwang Chang, and Yuan Lo, “Integrated Smart Car Navigation and Voice Control System Design,”Proceedings of 2006 CACS Automatic Control Conference (International Session), St. John’s University, Tamsui, Taiwan, Nov.10-11, pp.1105-1110, 2006.

84

林君明,黃安槿, “Ka 頻段艦載行動衛星通信之追蹤控制系統設計,” 國防部軍備局中山科學研究院95年度國防科技學術合作計畫成果發表會,桃園縣龍潭, 95年11月30日, 第B-43至B-50頁.

85

林君明, 蔡志宏, “TiO2奈米多孔性薄膜於染料敏化太陽能電池(DSSC)在塑膠軟板上制程應用,” 第十屆奈米工程暨微系統技術研討會,新竹縣工研院, 95年11月30日-12月1日, 第1-4頁.

86

林君明, 蔡紋錦, “垂直式彈性探針及附壓力感測器之晶圓及垂直式探針卡,”第十屆奈米工程暨微系統技術研討會,新竹縣工研院,95年11月30日-12月1日,第1至4頁.

87

林君明, 邱垂錡, 張博光, 呂仁超, “電子標籤天線與探針結構分析設計,”中國航太學會/中國民航學會聯合學術研討會, 國立中央大學, 臺灣中壢, 95年12月8日, PAPER NO.12-08,第1-8頁.

88

林君明, 邱垂錡, 張博光, 呂仁超, 趙永甯,張麗光 ,施博文, “電子標籤天線與探針結構分析設計,” 第三十屆中華民國力學學會年會暨全國力學研討會, 彰化大葉大學, 95年12月15-16日,第1至第8頁.

89

林君明, 林伯威,潘力誠, “整合有底閘極薄膜電晶體放大器之微陣列生物探針元件,” 2006生物醫學工程科技研討會(2006 BME Conference)暨國科會醫學工程學門成果發表會(2006醫工科技研討會),臺北市,臺灣大學, 2006年12月15-16日, PAPER NO-10509, pp.1- 4.

90

Jium-Ming Lin, Po-Wei Lin, and Li-Chern Pan, “Microarray Bioprobe Device Integrated with a Semiconductor Amplifier Module on a Flexible Substrate,” 2006 International Symposium on Biomedical Engineering, Taiwan (2006 ISOBME, Taiwan), Dec.14-16, 2006, PAPER NO.10063, pp. 1- 4.

91

Jium-Ming Lin and Wen-Jim Tsai, “Vertical-Type Wafer Level Probe Card Study,” 2007 Symposium on Nano Device Technology, Hsinchu, Taiwan, May 9-14, 2007.

92

Jium-Ming Lin and Chun-Chieh Lin, “Electrostatic Microprobe Non-Contact Mode SPM System Design,”Automation 2007 (The Ninth International Conference on Automation Technology), Taipei, Taiwan, June 13-152007.

93

Jium-Ming Lin, Po-Wei Lin, and Li-Chern Pan, “Integrating Microarray Bioprobe with Semiconductor Amplifier on a Flexible Substrate,” 2007 International Symposium on Nano Science and Technology, Taiwan, November 8-9, 2007, pp.255 -257.

94

Pham Minh Duc, Huan-Liang Tsai, and Jium-Ming Lin, “Optimal Control Design of Fuel Processing System by Linear Quadratic Gaussian and Loop Transfer Recovery Method,” Proceedings of 2007 International Automatic Control Conference (CACS 2007), National Chung-Hsing University, Taichung, Taiwan, Nov.9 -11, 2007, pp.556-561.

95

Jium-Ming Lin and Jiea-Chie Lin, “Scanning Microscope System Design with Linear Velocity Transducer for Feedback Compensation,” Proceedings of 2007 International Automatic Control Conference (CACS 2007), National Chung-Hsing University, Taichung, Taiwan, Nov.9 -11, 2007, pp.924 -927.

96

Jium-Ming Lin and Shau-Chieh Hwang, “Nanometer Measurement with Interpolation Electronics,”EUROCON 2007 Conference, Warsaw, Poland,September 9-12, 2007(EI).

97

Jium-Ming Lin and Po-Kuang Chang, “Eliminating Hysteresis Effect of Force Actuator for Profiler Design with Rate Inner Loop Compensation,”Proc. 2007 International Conference on Advance Manufacture,Tainan, NCKU, November 26-28, 2007, pp.B-3-5-2-1 - B-3-5-2-5.

98

Jium-Ming Lin and Po-Kuang Chang, “Opto-Mechatronics Integration for Nanometer    Measurement,” Proc. 2007 International Conference on Advance Manufacture,Tainan, NCKU, November 26-28, 2007, pp.B-4-5-1-1 - B-4-5-1-6.

99

林君明,任國光,吳正富,黃安槿, “消除馬達靜摩擦效應之行動通信天線衛星追蹤模糊控制系統設計,” 第16屆國防科技研討會,龍潭, 2007年11月30日, pp.4-1-1 - 4-1-8.

100

林君明,蔡一郎, “玻璃基板上非晶矽薄膜太陽能電池雷射退火與離子植入低溫制程設計,”2007臺灣光電科技研討會(2007 OPT,台中中興大學, 2007年11月30日, pp.IP-048-1 - IP-048-3.

101

林君明,陳科謀,謝正雄, “全彩發光二極體模組之分光曲線量測系統研製,” 2007臺灣光電科技研討會(2007 OPT,台中中興大學, 2007年11月30日, pp.HO-012-1- HO-012 -3.

102

林君明, 林伯威,潘力誠, “可撓式基板上整合薄膜電晶體放大器及微陣列生物探針設計,” 2007生物醫學工程科技研討會(2007 BME Conference)暨國科會醫學工程學門成果發表會(2007醫工科技研討會),台中市,逢甲大學, 2007年12月14-15日, PAPER NO-5A101, pp.1- 4.

103

林君明,黃安槿, “行動通信天線衛星追蹤控制系統設計,”

2007中華民國第十五屆模糊理論及其應用研討會,雲林技術學院, 2007年12月14-15日, pp. 91 - 96.

104

Jium-Ming Lin and Chun-Chieh Lin, “Profiler Design with Multi-Sensor Data Fusion Methods,” SICE Annual Conference 2007 in Takamatsu, September 17-20, 2007, pp. 710-715 (EI).

105

林君明、張博光、呂仁超、邱垂錡、賴理研、高志忠、洪明國、趙永寧, “驗測無線電子標籤天線與封條之設備整合開發研究,”2008全國RFID相關論文研討會, 臺北科技大學, Taiwan, 97年, 1月11日.

106

Jium-Ming Lin and I-Larn Tsai, “Glass Substrate-Based Laser Anneal Amorphous Silicon Solar Cell Design,” 2008 Symposium on Nano Device Technology, Hsinchu, Taiwan, May 15-16, 2008, pp.84, SC05.

107

Po-Kuang Chang, and Jium-Ming Lin, “Integrating Traditional and Fuzzy Controllers for Mobile Satellite Antenna Tracking System Design,” Proceedings of WSEAS Conference on  Advances in Applied Mathematics, Systems, Communications and Computers, selected papers from Circuits, Systems and Signals 2008,Marathon Beach, Attica, Greece, June 1-3, 2008, pp. 102-108(EI).

108

林君明,侯忠慶 , “可撓式基板上整合微陣列生物探針及薄膜電晶體放大器設計,” 2008年第十一屆工程科技與中西醫藥應用研討會,中國醫藥大學(台中市), 2008年6月15日, p.72.

109

Po-Kwang Chang, and Jium-Ming Lin, “Scanning Probe Microscope System Design with Fuzzy Control,”Proceedings of the 9th WSEAS International Conference on Automation and Information (ICAI’08), Bucharest, Romania, June 24-26, 2008,pp. 548-553(EI).

110

Huan-Liang Tsai and Jium-Ming Lin, “Optimal Control of Fuel Processing System Using Generalized Linear Quadratic Gaussian and Loop Transfer Recovery Method,”

Proceedings of the 17th IFAC World Congress, The international Federation of Automatic Control,Seoul, Korea, July 6-11, 2008, pp. 8425-8430 (EI) .

111

Po-Kuang Chang and Jium-Ming Lin, “Scanning Probe Microscope System Design with Linear Velocity Transducer for Feedback Compensation,” SICE Annual Conference 2008, Tokyo, August 20-22, pp. 2382-2387, 2008 (EI).

112

Jium-Ming Lin and Po-Kuang Chang, “Intelligent Mobile Satellite Antenna Tracking System Design,” SICE Annual Conference 2008, Tokyo, August 20-22, pp. 2922-2927, 2008 (EI).

113

林君明, 張博光, “衛星行動通信接收天線智慧型追蹤及穩定控制系統設計,”第六屆海峽兩岸航空航太學術研討會,西安西北工業大學,中國, 2008年9月1-4日, pp. 106 - 112.

114

Jium-Ming Lin, Po-Wei Lin, and Li-Chern Pan, “A Module by Integrating Micro Array Bio-Probes with Semiconductor Amplifier on a Flexible Substrate,

7thInternational Symposium on Nano-Biomedical Engineering (ISNBME-7),

Oct. 16-17, 2008, National Cheng-Kung University, Tainan, Taiwan, pp. 176-179.

115

Jium-Ming Lin and Po-Kuang Chang, “Electrostatic Driven Micro-cantilever Probe Design,” First International Workshop on Tip-Based Nanofabrication (TBN2008), Taipei, October 19-21, p.85, 2008.

116

Jium-Ming Lin and Wen-Jim Tsai, “Wafer Level Test Vertical Probe Design,” First International Workshop on Tip-Based Nanofabrication (TBN2008), Taipei,October 19-21, p.86, 2008.

117

Po-Kuang Chang and Jium-Ming Lin, “Non-Contact Mode SPM System Design with MEMS Micro-Cantilever Probe,”SME 2008 (2008第六屆全國精密製造研討會), 昆山科技大學,97年11月8日, pp.381- 386, 2008.

118

Po-Kuang Chang and Jium-Ming Lin, “Intelligent Scanning Probe Microscope System Design,”

SME 2008 (2008第六屆全國精密製造研討會),昆山科技大學,97年11月8日, pp.387- 392, 2008.

119

蘇育生,林君明,“矽薄膜太陽能電池電漿輔助化學氣相沉積本質層與透明導電膜於玻璃基板研究,”97年中華民國材料科學學會年會,國立臺北科技大學, 97年11月21-22日.

120

黃漢彬,林君明,“AZO與ITO應用於染料敏化太陽能電池製作制程與特性分析,”97年中華民國材料科學學會年會,國立臺北科技大學, 97年11月21-22日.

121

林君明,黃志傑,“二氧化鈦薄膜應用於塑膠軟板上之染料敏化太陽能電池制程研究,”

97年中華民國材料科學學會年會,國立臺北科技大學,97年11月21-22日.

122

Po-Kwang Chang, Jium-Ming Lin, and Yuan Lo,“Embedded Intelligent Car Navigation and Voice Control System Design,”第十七屆國防科技學術研討會,桃園國防大學八德校區, 97年11月27, pp. 461- 468, 2008.

123

Jium-Ming Lin, Po-Wei Lin, and Li-Chern Pan, “Integrating Micro Array Bio-Sensing Probes with Semiconductor Amplifier on a Flexible Substrate,” The 3rd International Conference on Sensing Technology (IEEE-ICST 2008), Nov. 30- Dec. 3, 2008, Tainan, Taiwan, pp.76-81(EI).

124

J. M. Lin, P. W. Lin, and L. C. Pan, “Integrating Micro Array Probes with Amplifier on Flexible Substrate,”

The 13th International Conference on Biomedical Engineering (ICBME), December 3- 6, 2008, Singaporepp.121-122(EI).

125

Jium-Ming Lin, Jui-Jung Tsai and Rong-Jinn Shieh, “Embedded Vehicle Positioning System Design,” 2008年民生電子研討會(WCE 2008), 5 Dec. 2008, Taiwan, pp. 260-266.

126

C. C. Hou, J. M. Lin, P. W. Lin, and L. C. Pan, “Micro Array Bio-Probes Design with Amplifier on a Flexible Substrate,”2008 International Symposium on Biomedical Engineering (ISOBME), 12-13 December 2008, 長庚大學,桃園p.10.

127

Po-Kuang Chang and Jium-Ming Lin, “Intelligent Mobile Satellite Antenna Tracking System Design,”2008第十六屆模糊理論及其應用研討會元智大學, 2008年12月20日, pp. 679- 684.

128

Po-Kuang Chang and Jium-Ming Lin, “Intelligent Scanning Probe Microscope System

Design,”2008第十六屆模糊理論及其應用研討會, 元智大學, 2008年12月20日, pp. 720 - 725.

129

林君明, “全彩發光二極體模組之分光曲線量測系統研製,”2008第一屆積體光機電科技應用與發展學術研討會,中華技術學院,97年12月23日,pp.79 - 84.

130

林君明,呂仁超,張博光,邱垂錡, “電子標籤天線與探針卡結構分析設計,”2009全國暨兩岸RFID科技論文研討會, 國立臺北科技大學 , 98年1月8-9日.

131

林君明,張博光,呂仁超,林志遠,陳世欽,邱垂錡,遊上賢, “種魚晶片監測管理系統 LF 讀取器天線與場強測試分析,”2009全國暨兩岸RFID科技論文研討會, 國立臺北科技大學, 98年1月8-9日.

132

Shian-Huan (Cooper) Chiu, Sheng-Hsiung Yu, Min-Hin Tung,Lei-Ken Wu, Ya-Tsz Yeh, James Manka, Chao-Tien (Healthy) Huang, John Robinson, Chin-Chou (Kevin) Huang, David Tien, YuYu Chen, Katsushi Makino, and , “Improve Scanner Matching Using Automated Real-time Feedback Control via Scanner Match Maker (SMM),”Proc. SPIEVol. 7272, 72723E (Mar. 23, 2009); DOI:10.1117/12.814186 (EI)Jium-Ming Lin

133

J. M. Lin, P. W. Lin, and L. C. Pan, “Bio-Sensing and Monitor System Design with Micro Array Probes and Amplifier on an Active RFID Tag,” 2009 International Conference on Neuroprosthetic Devices (2009 ICND)【2009 神經輔助元件國際研討會】March 10th, 2009.

134

Zhong-Qing Hou and Jium-Ming Lin, “Bio-Sensing and Monitor System Design with Micro Array Probes and Amplifier on an Active RFID Tag,” 2009 Annual Conference of Chemical Sensors (2009年第15屆化學感測科技研討會), 2009年5月16日,中山醫學大學口腔醫學院, pp.B-20-B-23.

135

Po-Kuang Chang and Jium-Ming Lin, “Eliminating Hysteresis Effect of Force Actuator in a SPM,”The 8th WSEAS International Conference on Instrumentation, Measurement, Circuits and Systems (IMCAS '09), May 20-22, 2009, Hangzhou, China, pp. 277- 283 (EI).

136

Jium-Ming Lin and Po-Kuang Chang,“Mobile Satellite Antenna Tracking System Design by Integrating Traditional and Fuzzy Controllers,”2009中華民國系統科學與工程會議(National Symposium on System Science and Engineering, NSSSE), June 26, 2009, Taipei, pp.949-954.

137

Po-Kuang Chang and Jium-Ming Lin, “Eliminating Hysteresis Effect of Force Actuator in a Scanning Probe Microscope,”SICE Annual Conference 2009, Fukoda,Japan August 18-21, 2009, pp. 5518- 5523 (EI).

138

林君明,黃仁傑, “天然色素粉末染料敏化太陽能電池於塑膠軟板上之製作與特性分析,

2009第三屆積體光機電科技與智慧財產權實務研討會(2009 The 3rd Conference onIntegrated Opto-Mechatronic Technology and Intellectual PropertyRights),中華民國積體光機電科技協會, 國立臺灣大學電機系,中華民國98年8月 6日.

139

Po-Kuang Chang and Jium-Ming Lin, “Intelligent Fuzzy Control of a Scanning Probe Microscope System Design,”Second International Symposium on Intelligent Informatics (ISII2009), September 13-15, 2009, QinHuangDao, China, pp. 951- 956 (EI)

140

Jium-Ming Lin, Po-Wei Lin, and Li-Chern Pan, “Bio-Sensing and Monitor System Design with Micro Array Probes and Amplifier on an Active RFID Tag,”IEEE-NANOMED 2009 (IEEE International Conference on Nano/Molecular Medicine and Engineering), TAINAN, TAIWAN, 18-21 October 2009, pp. 73- 77 (EI).

141

Po-Kuang Chang and Jium-Ming Lin,“Intelligent Mobile Satellite Antenna Tracking System Design with Tracking Loop Gain Parameter Variations Effect,”第十八屆國防科技學術研討會,桃園國防大學八德校區,2009年11月27日.

142

Po-Kuang Chang and Jium-Ming Lin, “Intelligent Scanning Probe Microscope System

Design,”Proceedings of 2009 International Automatic Control Conference

(CACS/IACC 2009),National Taipei University of Technology, Taipei,

Taiwan, 27-29 November, 2009.

143

Jium-Ming Lin and Zhong-Qing Hou, “Bio-Sensing and Monitor System Design with Micro Array Probes on an Active RFID Tag,” the 3rd INEC (IEEE InternationalNanoElectronics Conference), City University of Hong Kong, January 3 to8, 2010 (EI).